Hello, welcome to Foshan Jiana Decoration Materials Co., Ltd.!

中文 English

Service Hotline:

13516576892

北京铝方通

news

Product Categories

products

Hot key words

hot key words

Contact us

contact us

Foshan site: No.1, Dayuan Village, Gangyaoling, Guanyao Group, Nanhai District, Foshan City

Tel: 0757-88773902

Tel: 0757-88773903

Mobile: 13516576892

Beijing site: No.1, Row 3, No. 15, Laozhong Road, Daxing

Tel: 010-56246098

Fax: 010-67959228

Mobile: 13311178946

Website: en.fsjnjc.cn


Maintenance and storage of titanium-zinc alloy

Your current location: Home >> News >> technical knowledge

Maintenance and storage of titanium-zinc alloy

Date of release:2019-03-20 Author: Click:

Regarding the storage of titanium-zinc alloy sheets, the following points should be noted.

1. Fingerprint printing: When the titanium-zinc alloy is applied to the curtain wall, attention should be paid to the fingerprint problem. To remove them, mineral oil is needed. Of course, in order to prevent fingerprints from being fundamentally, it is best to wear cotton gloves when installing.

2. Grease and dust: If the surface of the titanium-zinc alloy plate is concentrated with grease and dust during installation, it can be wiped off with a clean and dry cloth. Do not wipe or clean the product. The dust can be washed away by the rain.

3. Surface scratches: If a small surface scratch occurs on the titanium zinc plate during installation, the new passivation layer will be regenerated due to the self-healing of the passivation layer of the titanium zinc plate. But if the scratch is very deep and wide, consider replacing the plate.

4, protective film: In order to prevent scratches during transportation and installation, titanium zinc plate manufacturers have a protective film on the surface of titanium zinc plate products. After the installation is completed, the protective film should be removed as soon as possible.

钛锌合金板

Storage recommendations for titanium-zinc alloy sheets:

1. Plates and coils must be stored in a well-ventilated, dry and cool, sheltered temperature to avoid condensation.

2. Plates and coils must be grounded with wooden frames to create sufficient air circulation.

3. In order to ensure that the material is not deformed, all the plates must be placed flat on the shelf.

4. During the coil transport process, the material can be placed along the horizontal or vertical axis according to customer requirements.

It is recommended to store the coil in its original packaging. If you need to stack because there is not enough space, please follow these guidelines:

1. If the coils are transported along the horizontal axis, the wooden racks must be stored separately in the original way and should not be stacked.

2. If the coils are shipped along the longitudinal axis, the wooden frames can be stacked, and up to five can be stacked for stability and safety.

3. The storage time of plates and coils should be as short as possible, especially on construction sites.

Storage and ventilation:

There is no connection between the white rust phenomenon of titanium zinc plate and the formation of natural passivation layer. If the ventilation is not smooth (due to improper storage, improper transportation or installation), the surface of the titanium zinc plate will form a powdery zinc hydroxide, which does not adhere and is not protective. This phenomenon will hinder the formation of a natural protective passivation layer and tend to cause corrosion of zinc.


The address of this article:http://en.fsjnjc.cn/news/389.html

Key word:钛锌合金,钛锌合金价格,钛锌合金厂家

The last one:拆除铝方通要注意些什么?
The next one:None

Recently browse:

Related products:

Related news:

Foshan Jiana Decoration Materials Co., Ltd.

Foshan site: No.1, Dayuan Village, Gangyaoling, Guanyao Group, Nanhai District, Foshan City

Tel: 0757-88773902/88773903

Fax: 0757-81776000/85774821

Beijing site: No.1, Row 3, No. 15, Laozhong Road, Daxing

Tel: 010-56246098

Fax: 010-67959228

Website: en.fsjnjc.cn


  • Service
  • number
    13311178946
  • Message
  • web site
  • Online Service