Hello, welcome to Foshan Jiana Decoration Materials Co., Ltd.!

中文 English

Service Hotline:

13516576892

北京铝方通

news

Product Categories

products

Hot key words

hot key words

Contact us

contact us

Foshan site: No.1, Dayuan Village, Gangyaoling, Guanyao Group, Nanhai District, Foshan City

Tel: 0757-88773902

Tel: 0757-88773903

Mobile: 13516576892

Beijing site: No.1, Row 3, No. 15, Laozhong Road, Daxing

Tel: 010-56246098

Fax: 010-67959228

Mobile: 13311178946

Website: en.fsjnjc.cn


How to distinguish the quality of aluminum veneers from good or bad?

Your current location: Home >> News >> technical knowledge

How to distinguish the quality of aluminum veneers from good or bad?

Date of release:2019-03-20 Author: Click:

First, the flatness of the aluminum veneer: from the flatness, folding and joint of the aluminum veneer. The high-quality aluminum veneer has strict selection of aluminum raw materials, less impurities, and the aluminum veneer will not be deformed after high temperature spraying. The processing equipment and management of sheet metal processing affect the flatness of the aluminum veneer; the aluminum veneer is folded. Generally 20mm high and 90 degrees angle, this can be very intuitive to show the quality of the product.

Second, the surface treatment process of aluminum veneer: the spraying process of aluminum veneer is different, which is related to the service life of aluminum veneer. The aluminum veneer indicates the advantages and disadvantages of the treatment process: fluorocarbon three coating > fluorocarbon two coating > thermal transfer wood grain or stone grain > polyester lacquer > polyester powder coating > electrostatic powder coating, the better the front quality Of course, the price is also more expensive.

Third, aluminum veneer coating process: aluminum veneer surface coating, high-quality aluminum veneer to use the most advanced aluminum veneer spraying line, there will be no metal and non-metallic impurities in the spraying process, the process precision is better High, the surface layer and the inner layer feel smooth and smooth, no uneven spots; the surface of the aluminum veneer is evenly sprayed, there is no color difference, and the coating meets international standards.

铝单板厂家

Fourth, check whether the aluminum veneer manufacturers cut corners: carefully observe the surface treatment of the aluminum veneers, some materials are very thin, but the high-quality aluminum veneers have uniform wall thickness, the aluminum veneers are tightly combined, and the quality of the aluminum plates is The thickness can reach the national standard; while the wall thickness deviation of the counterfeit product is large, the aluminum plate is thin, and the gap between the aluminum veneer materials is large.

Fifth, on the choice of manufacturers: If the volume is large, you should go to the aluminum veneer manufacturers to look at it, visit the site, see if the factory is big, see if the machine is advanced, and the production process. The quality of the process also affects the service life of the product, which is easy for customers to ignore. The pressure resistance of the aluminum veneer material is detected by a small pressure pump. High-quality aluminum veneers have high blasting pressure, which can generally meet or exceed the requirements of relevant national standards. However, the pressure inside the blasting of counterfeit products is generally low, which is difficult to meet the requirements of use.

Sixth, look at the raw materials: aluminum is divided into several grades according to the purity, generally can judge the merits of the curtain wall aluminum veneer material from the knocking sound, the sound of the good aluminum alloy material is crisp and loud. When you buy, you can try the sound by tapping the aluminum veneer with your hands. The sound is not a big problem, and the material is also ok.


The address of this article:http://en.fsjnjc.cn/news/373.html

Key word:铝单板,铝单板制作,北京铝单板厂家

Recently browse:

Foshan Jiana Decoration Materials Co., Ltd.

Foshan site: No.1, Dayuan Village, Gangyaoling, Guanyao Group, Nanhai District, Foshan City

Tel: 0757-88773902/88773903

Fax: 0757-81776000/85774821

Beijing site: No.1, Row 3, No. 15, Laozhong Road, Daxing

Tel: 010-56246098

Fax: 010-67959228

Website: en.fsjnjc.cn


  • Service
  • number
    13311178946
  • Message
  • web site
  • Online Service